Arch Kits & Column Stands

The AeroPole 30" Half Pole is an add-on accessory to the Aeropole System Kit for creating air-filled balloon columns and arche frames and features one female end fitting and one male end fitting. If the standard 5ft poles are too short and 10ft is too tall for a column, using a 30" Half Pole with a single AeroPole pole gives you a 7.5ft tall column. Perfect for an 8ft ceiling.The Half Pole is designed to insert into the Starter Pole (the first pole coming off the base plate) and is designed to fit into the other Splice Poles to create the frame of the design. This pole can be used to extend the length of your AeroPole System Kit.

...

...

...

1 AeroPole Base Plate.

...

...

...

NO DISCOUNTS on AeroPole Kits

NEW 2019 Base plate design: raised feet to help it sit on uneven ground. Uses standard hardware for the base pin available at hardware stores. Black powder coat finish.

The Easy Way to Create Air-Filled Arches!

The AeroPole System Kit allows balloon professionals to create decor without the need for Helium. Designed as a modular system, Aeropole Poles connect together allowing the designer to offer arches and columns in increments of 5ft lengths. Columns can be as short as 5ft and as tall as 15ft.

Easy to transport and set-up, the AeroPole System Kit can be used for both indoor and outdoor decor.

The 5ft poles are easy to connect and attach into the 28 lbs. Base Plates using the included Aeropole System Pins. The Base Plate features 5 connection points, allowing you to create one arch or daisy chain Base Plates together to create one arch after another.

Combine kits to be able to offer arches up to 50ft in length.

Kit Includes:
• 1 - Set of AeroPole Poles (1 - 5ft. Starter Pole and 6 - 5ft. Splice Poles)
• 2 - AeroPole System Pins
• 2 - AeroPole 28 lbs. Base Plates

...

...

...

This product transforms your existing Aeropole System Kit into a square-cornered-edge shape. 

Hardware Included: 2- 90 degree adapters and an instruction sheet.

Poles and bases not included.

...

...

...

This product transforms your existing Aeropole System Kit into a circular arch shape. 

Hardware Included: 2- angle pin adapters, 2 nuts, 2 lock washers, 2 bolts and 2 small nuts for the silver/gray original bases.

Poles and bases not included.

...

...

...

• This complete set comes with 7 poles (1 starter and 6 splice)
• Use with AEROPOLE SYSTEM base plates (not included)

...

...

...

23ft arch kit

Two big water bases, hold water or sand. 

Water filled base is around 9lbs.

Sand filled base would be much heavier.

...

...

...

column is 6ft.

Fill base with water it is 9lbs.

Fill base with sand and it is heavier.

...

...

...